When we construct a building we hear various names which are necessary to build a building in a very strong way so that it remains and stand strong through years. There are many ingredients that make a construction strong enough to stand the test of time. If they are used properly then a building can be durable enough to sustain all the negative effects on it strongly.
Wall putty is one of those ingredients needed to construct a strong building. This is mainly used on the surfaces like walls and ceilings before the painting is done. The wall putty in Bihar is made from a very fine powder and it has the qualities of absorbing moisture. The main ingredients to prepare this wall putty are polymers, white cement, and fillers which make this thing very smooth. There are various brands of wall putty available in the market and one can use the good quality to apply on the surfaces before the painting is done. There are major two kinds of wall putty available. One has coarse grades and the other has fine grades. The course grade wall putty is applied as the base coating on the walls so that the patches and undulations present in the walls get covered. Then starts the role of the fine grade one. They are applied to give a smooth finish to the surfaces.
How much coating of wall putty is needed on the wall completely depends on the present condition of the wall? If the wall or the surface has a lot of patches and undulations then they need more coatings of wall putty before the paint is applied. Once the application of wall putty is done, the surface should be made oil free and all the dust particles are to be removed well from the surface. If the surface has too many patches on it or has some major holes than a cement paste has to be applied first to cover those things. After this is done, the wall putty should be applied. The wall has to be wet in a proper way so that it can provide a strong base to the wall putty. If wall putty is already applied on the wall then the coating of primer is not required.
Wall putty is good for both interior and exterior surface walls of a building or a house. It can also be used on the walls which are freshly painted or on some old painted walls. But if the wall has old paints on it, then it has to be removed properly before the wall putty is applied. After that the fresh paint can be applied.
There are some major benefits of using wall putty. It, when applied, becomes a part of the plaster. They are hugely water resistant and so the walls remain safe from intermittent rains. If wall putty is applied properly the paint on the walls survives longer. Wall putty manufacturers in Bihar ensures that the minor cracks and lines on the walls will be covered by this.